ASME B16.5 Welded Flanges-manufacture,factory,supplier from China

Welded flangesParts the regional tubes are linked to each and every otherThe welded flange is the vicinity the local the pipe is linked to each and every one-of-a-kind and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets. A welded flange is a disc-shaped place that is most in many instances positioned in plumbing.A welded flange connection is the fixing of two pipes, fittings or tools on a weld.

Flat welded flange refers to a flange that is related with a container or pipeline through fillet weld. It is an arbitrary flange. During the design, in accordance to the integrity of the connection between the flange ring and the straight cylinder section, it is checked in accordance to the necessary or free flange respectively. Flange rings are on hand with and except neck.

Flat welded flange refers to a flange that is associated with a container or pipeline via ability of fillet weld. It is an arbitrary flange. During the design, in accordance to the integrity of the connection between the flange ring and the straight cylinder section, it is checked in accordance to the vital or free flange respectively. Flange rings are available with and barring neck.

High Pressure FlangesHigh-pressure flange: A flange used for the connection of pipes or gear with a stress extended than 10MPa.

Welded flangesParts the regional tubes are linked to each and every and every and each and every otherThe welded flange is the local the local the pipe is linked to each and every and every one-of-a-kind and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets.

Welded flangesParts the neighborhood tubes are linked to every otherThe welded flange is the region the neighborhood the pipe is linked to every special and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets. A welded flange is a disc-shaped region that is most in many cases located in plumbing.A welded flange connection is the fixing of two pipes, fittings or gear on a weld.

Welded flangesParts the regional tubes are linked to every and each and each and each and each otherThe welded flange is the nearby the neighborhood the pipe is linked to every and each and every and each and every one-of-a-kind and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets.

Welded flangesParts the vicinity tubes are linked to each otherThe welded flange is the area the vicinity the pipe is linked to each unique and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets. A welded flange is a disc-shaped area that is most in many instances discovered in plumbing.A welded flange connection is the fixing of two pipes, fittings or equipment on a weld.

Welded FlangesParts the place tubes are linked to every otherThe welded flange is the section the place the pipe is linked to every different and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets. A welded flange is a disc-shaped section that is most oftentimes observed in plumbing.A welded flange connection is the fixing of two pipes, fittings or tools on a weld. Between the two welds, a flange pad is added, which is mounted collectively with bolts to entire the connection.

Socket welding flange refers to the flange that is inserted into the flange ring ladder at the grant up of the pipe and welded on the out of doors of the pipe. There are two types: with and barring a neck. The flange with neck tube has unique rigidity, small welding deformation and relevant sealing, and can be used for matters to do with stress of 1.0~10.0MPa. Type B flanges for containers are in addition socket welded flanges, which are used in stipulations with immoderate sealing requirements.

Welded flangesParts the regional tubes are linked to every and each and every otherThe welded flange is the neighborhood the neighborhood the pipe is linked to every and each one-of-a-kind and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets.

Welded flangesParts the regional tubes are linked to each and every and every and every and every and every otherThe welded flange is the close by the local the pipe is linked to each and every and each and every and each and every one-of-a-kind and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets.

1. Loose flanges can be divided into three forms: flat welded metal ring free flanges, plate flanging free flanges, and butt welded ring free flanges.2. The free flange is to use flanging, steel rings, etc. to put the flange on the pipe end, and the flange can go on the pipe end. The metal ring or flange is the sealing surface, and the attribute of the flange is to compress them.

Flat welded flange refers to a flange that is related with a container or pipeline by means of fillet weld. It is an arbitrary flange. During the design, in accordance to the integrity of the connection between the flange ring and the straight cylinder section, it is checked in accordance to the fundamental or free flange respectively. Flange rings are handy with and besides neck.

The butt welding flange is not easy to deform, seals well, is widely used, has the corresponding rigid and elastic requirements and reasonable butt welding thinning transition, the welding joint is far from the joint surface, and the joint surface is protected from welding temperature deformation, it adopts a more complex cough flare structure, which is suitable for pipelines with large fluctuations in pressure or temperature or pipelines with high temperature, high pressure and low temperature, and is generally used for the connection of pipelines and valves with PN greater than 2.5MPa, and i

Flat welded flange refers to a flange that is related with a container or pipeline by way of potential of fillet weld. It is an arbitrary flange. During the design, in accordance to the integrity of the connection between the flange ring and the straight cylinder section, it is checked in accordance to the quintessential or free flange respectively. Flange rings are handy with and barring neck.

Threaded flange refers to a flange that is linked to a pipe with the useful resource of thread. When designing, it can be dealt with with free flanges. The attain is that no welding is required and the multiplied torque on the cylinder or pipe is very small when the flange is deformed. The draw decrease lower back is that the flange thickness is massive and the rate is higher.

The formal name of blind disk is Flange cover, and some are also called blind flange or pipe plug. It is a flange without a hole in the middle and is used to seal the pipe opening. The function is the same as that of the head and cap, except that the blind seal is a removable sealing device, and the seal of the head is not ready to be opened again. There are many types of sealing surfaces, including plane, convex, concave and convex surface, tenon and groove surface and ring connection surface.

1. According to the chemical enterprise standard: quintessential flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring free flange (PJ/SE), flat welded ring unfastened flange (PJ/RJ), lining flange cowl (BL (S)), flange cowl (BL).2.

304 stainless metal flangeA extra versatile stainless steel304 is a tremendously versatile stainless steel, which is broadly used in the manufacture of gear and components that require suitable complete homes (corrosion resistance and formability).304 stainless metal is a grade of stainless metal produced in accordance with ASTM standards. 304 is equal to 0Cr19Ni9 (0Cr18Ni9) stainless metal in China. 304 consists of 19% chromium and 9% nickel.

The butt welding flange is now no longer frequent to deform, seals well, is notably used, has the corresponding inflexible and elastic requirements and good butt welding thinning transition, the welding joint is a prolonged way from the joint surface, and the joint floor is blanketed from welding temperature deformation, it adopts a accelerated intricate cough flare structure, which is great for pipelines with massive fluctuations in stress or temperature or pipelines with excessive te

According to the chemical agency standard: quintessential flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring free flange (PJ/SE), flat welded ring free flange (PJ/RJ), lining flange cowl (BL (S)), flange cowl (BL).2. According to petrochemical enterprise company standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), free flange (LJ), flange cowl (not note).3.

1. According to the chemical employer standard: quintessential flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring free flange (PJ/SE), flat welded ring free flange (PJ/RJ), lining flange cowl (BL (S)), flange cowl (BL).2. According to petrochemical business enterprise standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), free flange (LJ), flange cowl (not note).3.

1. According to the chemical industry standard: integral flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring loose flange (PJ/SE), flat welded ring loose flange (PJ/RJ), lining flange cover (BL (S)), flange cover (BL).2. According to petrochemical industry standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), loose flange (LJ), flange cover (not note).3.