Flange Cover-manufacture,factory,supplier from China

The advantages of plastic flange cover are as follows:Lightweight: Compared with metal flange covers, plastic flange covers are lighter and easier to handle and install.Strong corrosion resistance: The plastic flange cover has good corrosion resistance and is not easily attacked by chemicals.Energy saving and environmental protection: The production process of plastic flange cover has low energy consumption, and at the same time, it can be recycled, which meets the requirements of environmental protection.Excellent abrasion resistance: the plastic flange cover has a smooth surface, strong abra

The advantages of metal flange cover are as follows:High strength: Metal flange covers are usually made of metal materials, which have high strength and hardness, and are able to withstand large pressures and loads.High temperature resistance: The metal flange cover has good high temperature resistance and is suitable for use in high temperature environments.Corrosion resistance: The metal flange cover has good corrosion resistance and is not susceptible to chemical erosion.Strong wear resistance: The metal flange cover has high surface hardness, strong wear resistance and long service life.Go

The formal title of blind disk is Flange cover, and some are moreover referred to as blind flange or pipe plug. It is a flange barring a gap in the core and is used to seal the pipe opening. The characteristic is the equal as that of the head and cap, barring that the blind seal is a detachable sealing device, and the seal of the head is now now now not geared up to be opened again.

The formal title of blind disk is Flange cover, and some are in addition referred to as blind flange or pipe plug. It is a flange barring a gap in the core and is used to seal the pipe opening. The attribute is the equal as that of the head and cap, barring that the blind seal is a removable sealing device, and the seal of the head is now now now now no longer geared up to be opened again.

The formal title of blind disk is Flange cover, and some are in addition referred to as blind flange or pipe plug. It is a flange barring a hole in the core and is used to seal the pipe opening. The attribute is the equal as that of the head and cap, barring that the blind seal is a detachable sealing device, and the seal of the head is now now now now not geared up to be opened again.

The formal title of blind disk is Flange cover, and some are additionally referred to as blind flange or pipe plug. It is a flange barring a gap in the center and is used to seal the pipe opening. The feature is the equal as that of the head and cap, besides that the blind seal is a detachable sealing device, and the seal of the head is now not equipped to be opened again.

The formal title of blind disk is Flange cover, and some are additionally referred to as blind flange or pipe plug. It is a flange barring a hole in the core and is used to seal the pipe opening. The function is the equal as that of the head and cap, barring that the blind seal is a removable sealing device, and the seal of the head is now now not outfitted to be opened again.

The formal name of blind disk is Flange cover, and some are also called blind flange or pipe plug. It is a flange without a hole in the middle and is used to seal the pipe opening. The function is the same as that of the head and cap, except that the blind seal is a removable sealing device, and the seal of the head is not ready to be opened again. There are many types of sealing surfaces, including plane, convex, concave and convex surface, tenon and groove surface and ring connection surface.

The formal title of blind disk is Flange cover, and some are in addition referred to as blind flange or pipe plug. It is a flange barring a hole in the core and is used to seal the pipe opening. The attribute is the equal as that of the head and cap, barring that the blind seal is a detachable sealing device, and the seal of the head is now now now now no longer geared up to be opened again. There are many kinds of sealing surfaces, which consists of plane, convex, concave and convex surface, tenon and groove floor and ring connection surface.

The formal title of blind disk is Flange cover, and some are in addition referred to as blind flange or pipe plug. It is a flange barring a gap in the core and is used to seal the pipe opening. The attribute is the equal as that of the head and cap, barring that the blind seal is a removable sealing device, and the seal of the head is now now now now no longer geared up to be opened again. There are many types of sealing surfaces, which consists of plane, convex, concave and convex surface, tenon and groove ground and ring connection surface.

The formal identify of blind disk is Flange cover, and some are additionally referred to as blind flange or pipe plug. It is a flange except a gap in the center and is used to seal the pipe opening. The feature is the identical as that of the head and cap, besides that the blind seal is a detachable sealing device, and the seal of the head is no longer prepared to be opened again.

1. According to the chemical industry standard: integral flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring loose flange (PJ/SE), flat welded ring loose flange (PJ/RJ), lining flange cover (BL (S)), flange cover (BL).2. According to petrochemical industry standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), loose flange (LJ), flange cover (not note).3.

A regulating flange is a special type of flange that is used to regulate and control the flow, pressure, or temperature of a fluid in a piping system.

Threaded flange refers to a flange that is linked to a pipe with the simply beneficial recommended beneficial useful resource of thread. When designing, it can be dealt with with free flanges. The accumulate is that no welding is required and the improved torque on the cylinder or pipe is very small when the flange is deformed. The draw limit decrease lower back is that the flange thickness is huge and the fee is higher.

A copper flange is a pipe connection component, normally made of copper, whose points and advantages include:Excellent electrical and thermal conductivity: Copper has suitable electrical and thermal conductivity, and is appropriate for some activities that require electrical conductivity or warmth dissipation, such as digital equipment, cooling systems, etc.Good corrosion resistance: copper has sturdy corrosion resistance, is no longer convenient to be affected by means of oxidati

A copper flange is a pipe connection component, usually made of copper, whose features and benefits include:Excellent electrical and thermal conductivity: Copper has good electrical and thermal conductivity, and is suitable for some occasions that require electrical conductivity or heat dissipation, such as electronic equipment, cooling systems, etc.Good corrosion resistance: copper has strong corrosion resistance, is not easy to be affected by oxidation, and can adapt to the use environment of some corrosive media.Easy to process: Copper material is relatively soft, easy to cut, weld and proc

Threaded flange refers to a flange that is linked to a pipe with the really useful beneficial useful resource of thread. When designing, it can be dealt with with free flanges. The collect is that no welding is required and the multiplied torque on the cylinder or pipe is very small when the flange is deformed. The draw decrease reduce back is that the flange thickness is massive and the cost is higher.

Flat flange is a commonly used flange connection method, and its advantages and features include:Low cost: Flat flanges are usually simple to fabricate and have a low cost, making them suitable for use in cost-sensitive projects.Easy installation: The structure of the flat flange is simple, the installation process is not complicated, and it is easy to operate and maintain.Wide applicability: The flat flange is suitable for connecting various pipes and equipment, which can meet the needs of different occasions.Low leakage rate: The flat flange is firmly installed and tightly connected, with a

Metal flanges are a common pipe connection component, usually made of metal materials, and their benefits and features include:High strength: The metal flange is made of metal material, which has high strength and pressure resistance, and is suitable for high pressure and high temperature environments.Corrosion resistance: Metal flanges usually have good corrosion resistance, which can resist the erosion of some corrosive media and prolong the service life.High temperature resistance: The metal flange can withstand the working conditions in a high-temperature environment and is not easy to def

Welded flangesParts where tubes are connected to each otherThe welded flange is the part where the pipe is connected to each other and is connected to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets. A welded flange is a disc-shaped part that is most commonly found in plumbing.A welded flange connection is the fixing of two pipes, fittings or equipment on a weld. Between the two welds, a flange pad is added, which is fastened together with bolts to complete the connection.

High neck flangeProducts used in boilers and pressure vessels, petroleum, chemical, shipbuilding, pharmaceutical, metallurgy, machinery, stamping elbows, food and other industriesHigh neck flange refers to the high neck height, which improves the stiffness and bearing capacity of the flange.High neck flange: Compared with butt welding flange, the welding workload is large, the electrode consumption is high, and it cannot withstand high temperature and high pressure and repeated bending and temperature fluctuations, but it is more convenient to install on site, and the process of weld film flaw

American standard flangeThe part that connects the tube to the tubeThe American standard flange refers to the parts that connect the pipe with the pipe, which is connected to the pipe end with holes in the American standard flange, and the bolts make the two flanges tightly connected. American Standard flanges can be cast, threaded, or welded.The American Standard flange connection is a detachable connection. It is to fix two pipes, pipe fittings or equipment on a flange plate first, and between the two flanges, add flange pads and fasten them together with bolts to complete the connection.

Threaded flange refers to a flange that is linked to a pipe with the beneficial useful resource of thread. When designing, it can be dealt with with free flanges. The acquire is that no welding is required and the increased torque on the cylinder or pipe is very small when the flange is deformed. The draw minimize decrease returned is that the flange thickness is large and the charge is higher.

There are two main systems of international pipe flange standards, namely the European pipe flange system represented by the German DIN (including the former Soviet Union) and the American pipe flange system represented by the American ANSI pipe flange. In addition to this, there are Japanese JIS pipe flanges, but they are generally only used for public works in petrochemical plants and have little international influence. The flanges of various countries are briefly introduced as follows:1. The European system represented by Germany and the former Soviet Union is flanged2.