GB Threaded Flange-manufacture,factory,supplier from China

Threaded flange refers to a flange that is linked to a pipe via thread. When designing, it can be handled with unfastened flanges. The benefit is that no welding is required and the extra torque on the cylinder or pipe is very small when the flange is deformed. The downside is that the flange thickness is giant and the value is higher.

Threaded flange refers to a flange that is connected to a pipe by thread. When designing, it can be treated with loose flanges. The advantage is that no welding is required and the additional torque on the cylinder or pipe is very small when the flange is deformed. The disadvantage is that the flange thickness is large and the cost is higher. It is suitable for the connection of high-pressure pipelines.The threaded flange is a kind of non-welded flange that processes the inner hole of the flange into a pipe thread and connects it with a threaded pipe.

Threaded flange refers to a flange that is linked to a pipe with the resource of thread. When designing, it can be dealt with with free flanges. The obtain is that no welding is required and the increased torque on the cylinder or pipe is very small when the flange is deformed. The draw lower back is that the flange thickness is large and the fee is higher.

Threaded flange refers to a flange that is linked to a pipe with the useful resource of thread. When designing, it can be dealt with with free flanges. The attain is that no welding is required and the multiplied torque on the cylinder or pipe is very small when the flange is deformed. The draw decrease lower back is that the flange thickness is massive and the rate is higher.

The formal title of blind disk is Flange cover, and some are additionally referred to as blind flange or pipe plug. It is a flange barring a gap in the center and is used to seal the pipe opening. The feature is the equal as that of the head and cap, besides that the blind seal is a detachable sealing device, and the seal of the head is now not equipped to be opened again.

Threaded flange refers to a flange that is linked to a pipe with the beneficial useful resource of thread. When designing, it can be dealt with with free flanges. The acquire is that no welding is required and the increased torque on the cylinder or pipe is very small when the flange is deformed. The draw minimize decrease returned is that the flange thickness is large and the charge is higher.

Threaded flange refers to a flange that is linked to a pipe with the certainly really helpful endorsed recommended beneficial aid of thread. When designing, it can be dealt with with free flanges. The accumulate is that no welding is required and the expanded torque on the cylinder or pipe is very small when the flange is deformed. The draw restriction limit decrease lower back is that the flange thickness is big and the price is higher.

Threaded flange refers to a flange that is linked to a pipe with the simply beneficial recommended beneficial useful resource of thread. When designing, it can be dealt with with free flanges. The accumulate is that no welding is required and the improved torque on the cylinder or pipe is very small when the flange is deformed. The draw limit decrease lower back is that the flange thickness is huge and the fee is higher.

Threaded flange refers to a flange that is linked to a pipe with the really useful beneficial useful resource of thread. When designing, it can be dealt with with free flanges. The collect is that no welding is required and the multiplied torque on the cylinder or pipe is very small when the flange is deformed. The draw decrease reduce back is that the flange thickness is massive and the cost is higher.

Threaded flange refers to a flange that is linked to a pipe with the aid of thread. When designing, it can be dealt with with loose flanges. The gain is that no welding is required and the greater torque on the cylinder or pipe is very small when the flange is deformed. The draw back is that the flange thickness is massive and the price is higher.

High Pressure FlangesHigh-pressure flange: A flange used for the connection of pipes or gear with a stress greater than 10MPa.

Socket welding flange refers to the flange that is inserted into the flange ring ladder at the quit of the pipe and welded on the backyard of the pipe. There are two types: with and besides a neck. The flange with neck tube has exact rigidity, small welding deformation and true sealing, and can be used for activities with stress of 1.0~10.0MPa. Type B flanges for containers are additionally socket welded flanges, which are used in conditions with excessive sealing requirements.

1. Loose flanges can be divided into three forms: flat welded metallic ring free flanges, plate flanging free flanges, and butt welded ring free flanges.2. The free flange is to use flanging, steel rings, etc. to put the flange on the pipe end, and the flange can go on the pipe end. The steel ring or flange is the sealing surface, and the characteristic of the flange is to compress them. It can be viewed that the free flange does now now not come into contact with the medium due to the reality it is blocked by using the use of the metallic ring or flange.3.

1. Loose flanges can be divided into three forms: flat welded metal ring free flanges, plate flanging unfastened flanges, and butt welded ring unfastened flanges.2. The free flange is to use flanging, metal rings, etc. to put the flange on the pipe end, and the flange can go on the pipe end. The metal ring or flange is the sealing surface, and the feature of the flange is to compress them.

The butt welding flange is now no longer common to deform, seals well, is widely used, has the corresponding rigid and elastic necessities and realistic butt welding thinning transition, the welding joint is a lengthy way from the joint surface, and the joint flooring is blanketed from welding temperature deformation, it adopts a increased intricate cough flare structure, which is gorgeous for pipelines with large fluctuations in stress or temperature or pipelines with i

Welded FlangesParts the place tubes are linked to every otherThe welded flange is the section the place the pipe is linked to every different and is linked to the pipe end. There are holes on the welded flange, and the bolts make the two flanges tightly connected. Sealed with intermittent gaskets. A welded flange is a disc-shaped section that is most oftentimes observed in plumbing.A welded flange connection is the fixing of two pipes, fittings or tools on a weld. Between the two welds, a flange pad is added, which is mounted collectively with bolts to entire the connection.

Flat welded flange refers to a flange that is related with a container or pipeline by way of potential of fillet weld. It is an arbitrary flange. During the design, in accordance to the integrity of the connection between the flange ring and the straight cylinder section, it is checked in accordance to the quintessential or free flange respectively. Flange rings are handy with and barring neck.

American standard flangeThe part that connects the tube to the tubeThe American standard flange refers to the parts that connect the pipe with the pipe, which is connected to the pipe end with holes in the American standard flange, and the bolts make the two flanges tightly connected. American Standard flanges can be cast, threaded, or welded.The American Standard flange connection is a detachable connection. It is to fix two pipes, pipe fittings or equipment on a flange plate first, and between the two flanges, add flange pads and fasten them together with bolts to complete the connection.

Socket welded flange is a in many instances used pipe connection method, and its points and blessings include:Good fastening: The socket welding flange connects the pipe by means of welding, the weld is firm, the connection is tight, and it has desirable sealing performance.Strong compressive capacity: The welded connection technique makes the socket welded flange can face up to giant pressure, which is appropriate for high-pressure pipeline system.Corrosion resistance: Reduced danger of corrosion an

According to the chemical agency standard: quintessential flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring free flange (PJ/SE), flat welded ring free flange (PJ/RJ), lining flange cowl (BL (S)), flange cowl (BL).2. According to petrochemical enterprise company standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), free flange (LJ), flange cowl (not note).3.

1. According to the chemical enterprise standard: quintessential flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring free flange (PJ/SE), flat welded ring unfastened flange (PJ/RJ), lining flange cowl (BL (S)), flange cowl (BL).2.

1. According to the chemical employer standard: quintessential flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring free flange (PJ/SE), flat welded ring free flange (PJ/RJ), lining flange cowl (BL (S)), flange cowl (BL).2. According to petrochemical business enterprise standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), free flange (LJ), flange cowl (not note).3.

1. According to the chemical industry standard: integral flange (IF), threaded flange (Th), plate flat welded flange (PL), butt welded flange with neck (WN), flat welded flange with neck (SO), socket welded flange (SW), butt welded ring loose flange (PJ/SE), flat welded ring loose flange (PJ/RJ), lining flange cover (BL (S)), flange cover (BL).2. According to petrochemical industry standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), loose flange (LJ), flange cover (not note).3.

The advantages of plastic flange cover are as follows:Lightweight: Compared with metal flange covers, plastic flange covers are lighter and easier to handle and install.Strong corrosion resistance: The plastic flange cover has good corrosion resistance and is not easily attacked by chemicals.Energy saving and environmental protection: The production process of plastic flange cover has low energy consumption, and at the same time, it can be recycled, which meets the requirements of environmental protection.Excellent abrasion resistance: the plastic flange cover has a smooth surface, strong abra